Switch to English?
Yes
Переключитись на українську?
Так
Переключиться на русскую?
Да
Przełączyć się na polską?
Tak
Post your project for free and start getting offers from freelance performers within minutes after posting!

Нужен гидравлический расчет.


Applications 1

App view is available only registered users.
The client does not want to make a prepayment? Payment via Safe help avoid possible fraud.
  • Profile banned
    22 August 2016, 15:16 |

    Если нужно проверить  правильность  расчетов  то получается работа уже выполнена и  осталось сделать  только таблицу гидравлического расчета ОЦК   и этим самым  мы проверим правильность выполненной работы  

  • Kirill Y. KY.Researching
    22 August 2016, 16:46 |

    Значит только расчет выполнить. Проверить всё ли есть согласно примеру, все ли расчеты сделаны. 

Current freelance projects in the category Drawings and diagrams

Project of a one-story house 165 sq

50 USD

Need to create a Project of a single-story private house - 2D, 3D. Area 165 sq.m (length 16.5m, width 10m). Room dimensions are also specified (1 sq = 0.5m). Attached is my plan, which needs to be more precisely refined according to all drafting rules. Roof with a 1m overhang…

DesigningDrawings and diagrams ∙ 6 proposals

Waveguide 2.45GHz with L swivel hinge

It is necessary to design and calculate a rectangular waveguide with a rotating hinge, design all nodes. Input 6kW magnetron. Output spiral antenna. Dimensions - waveguide cross-section, required length, magnetron and antenna parameters, etc. will be provided upon request. As a…

EngineeringDrawings and diagrams

Drawings of power line supports

I will buy drawings of the KMD section for the following types of power line supports: PB110-8; U110-2; U110-2+5; U110-2P+5; US110-6; U110-2+9; P110-6V; PS110-6V; PS110-6V+4. Drawings are needed for the direct production of the specified supports. Downloaded from the internet,…

Drawings and diagrams ∙ 1 proposal

Calculate the cross-sections of SIPA cables across the territory

I will provide a diagram with distances and estimated loads, you need to calculate the sections of the SIP. There will be three sections, approximately 600 meters each, 2 pieces, and one 300.

EngineeringDrawings and diagrams ∙ 2 proposals

I am looking for an air conditioning and ventilation system.

You need a specialist who is able to make a fee for the project of the ventilation system and air conditioning system of the residential house. It is necessary to calculate the materials, work hours, make a list of equipment,

DesigningDrawings and diagrams

Client
Kirill Y. KY.Researching
Ukraine Kyiv  34  0
Project published
7 years ago
89 views
Labels