Help with MicroTik and Hotspot
39 USD1) The "Head" micron tells the DHCP address
2) It is connected to 4 access points to be a wireless switch via wifi
3) We have two WiFi networks - upshifter (open, hotspot) and upshifter_service (closed)
4) For devices in the first network, the address type 192.168.248.1-250 is distributed.
5) For devices in the second (closed) network - 192.168.100-102.1-250
Problems are as follows:
1) On the Apple devices, the authorization is constantly out of the first network, asks to enter the login and password (the Mac addresses of the devices are not changed).2) On other devices - if I am above the boundaries of the network, and then returned - then I connect to the network, but the internet doesn't work until I go to the site WITH https and then I automatically authorize and the internet works.3) The printer in the closed network is not visible in the open.If you contact him directly through the IP - he finds, but regrets that he does not have the right network settings and that they need to be corrected.The printer sees the internet and everything is fine.Needed to:
On 1 and 2 questions - it is ideal to do so that if I entered a password once - I don't have to authorize constantly
3 point - I don't know what to do, it's necessary for the devices in the open network to see this printer
У нас в офисе реализована следующая схема интернета:
1) "Головной" микротик раздает DHCP адреса
2) К нему подключены 4 точки доступа чтобы был бесшовный переход по wifi
3) WiFi сетки у нас две - upshifter (открытая, hotspot) и upshifter_service (закрытая)
4) Для устройств в первой сетке раздаются адреса типа 192.168.248.1-250
5) Для устройств во второй (закрытой) сетке - 192.168.100-102.1-250
Проблемы следующие:
1) На apple устройствах постоянно вылетает авторизация из первой сетки, просит вводить логин и пароль (мак адреса устройств не меняются).
2) На других устройствах - если я выше за пределы сети, а потом вернулся - то я подключаюсь к сети, но интернет не работает пока я не зайду на сайт БЕЗ https и тогда меня автоматом авторизует и интернет заработает.
3) Принтер, находящийся в закрытой сети - не видно в открытой. Если обращаться к нему напрямую по IP - то находит, но ругается что у него не правильные настройки сети и что их нужно поправить. Хотя сам принтер видит интернет и все у него хорошо.
Нужно:
По 1 и 2 вопросу - в идеале сделать так, что если я ввел один раз пароль - меня не надо авторизовывать постоянно
По 3 пункту - не знаю что делать, надо чтобы устройства в открытой сетке видели этот принтер
Еще момент - после авторизации (когда вводишь пароль) перекидывает на MSN
После авторизации, когда не вводишь пароль (просто открыл браузер, там сказали ок) - перекидывает на левый сайт.
Нужно чтобы перекидывало на наш сайт в обоих случаях
Client's feedback on cooperation with Petr Nehaychik
Help with MicroTik and HotspotOK, thank you for the long waiting.
Profile deleted | Safe
Freelancer's feedback on cooperation with client
Help with MicroTik and HotspotThe project was complicated, flooded into additional temporary costs, but despite that they were able to bring it to the desired result with Peter. Unfortunately, the currency rate has changed over this time.
-
147 7 0 1 Good day .
Ready to take your project. The experience of setting the routers is sufficient.
The problem with Macs requires testing, so the deadlines are indicated taking into account the time to identify additional difficulties.
Добрый день.
Готов взяться за ваш проект. Опыт настройки роутеров Микротик достаточный.
Проблема с Маками требует тестирования, поэтому сроки указаны с учетом времени на выявление дополнительных сложностей.
-
580 12 0 Good day .
You have to look at your configuration and then the deadlines will be known so I as a project is interesting ready to take this question. The elite I will say that the possible problem with Apple will not be able to solve so in the microtik shell there are bugs with the robot with their technique.
Repair the hotspot and Potter robot without any problems with the connectivity bag requires a detailed analysis.
Добрый день.
Нужно посмотреть на вашу конфигурацию и после будут известны сроки так я как проект интересен готов взяться за этот вопрос. Элитное скажу что возможно проблему с apple не получится решить так в пришивке mikrotik есть баги при роботе с их техникой.
Поправить роботу хотспота и Поттера без проблем с багами подключений нужен детальный анализ.
Current freelance projects in the category System administration
Installation of the server
200 USD
Hello, I'm looking for a Devops developer for Ubuntu OS that will install the software on 2 additional servers with (4 existing), and synchronizes their work. Programs to work with Supervisors ClickHouse The MySQL The Seaweedfs The Nginx Ruby on Rails by Sidekiq by Rvm Proxies… Linux and Unix, System administration ∙ 7 proposals |
Hosting access by Abills Mikrotik
13 USD
Subscribers with a negative deposit get a work ip, a problem with the bullets or in the wrong setting, you need to help solve the problem. System administration, Computer networking ∙ 1 proposal |
Consultation on System Restoration at HetznerThe root server on Hetzner has ceased to load, after reboot it doesn't pin, help is needed to find the cause and solve the problem System administration ∙ 9 proposals |
Configuration and consultation on the print server for remote printingWelcome to! You need to consult and set the printer server for remote printing, we have a printer and you need to do so that it can be printed from any place and beyond the local network System administration, Computer networking ∙ 7 proposals |
Complete the Customer’s Personal Office1.In the existing personal office, add an questionnaire to fill in 2.Synchronize the personal office with the 1C program (transmission of keys to the 1C programmer) 3.Settings the calculation discount when selected by the customer 2-3-4-5 studies at the same time… System administration, Hybrid mobile apps ∙ 2 proposals |