Program for Attiny13, desirable on Codevision AVR
11 USD1. Программирование значения АЦП и запись в память, например при нажатой кнопке и подаче питания.
2. Первый режим работы при выключенной кнопке Режим
Первое нажатие кнопки АЦП включает D1, и на 0,5 сек включает D2
Второе нажатие кнопки АЦП на 0,5 сек включает D2, D1 продолжает работать
Третье нажатие кнопки АЦП выключает D1 и D2
3. Второй режим при включенной кнопке Режим
Все нажатия кнопки АЦП на 0,5 сек включает D2
Диод D1 постоянно включен
Отпускание кнопки Режим все выключает и возвращается в начало.
Client's feedback on cooperation with Yevgeny Revyakin
Program for Attiny13, desirable on Codevision AVREverything is good!!! He worked as it should.
Freelancer's feedback on cooperation with Sergey Kushnir
Program for Attiny13, desirable on Codevision AVRA great customer. I recommend cooperation.
-
4636 68 0 1 Good day ! Great experience in developing devices on microcontrollers. I can do.
Добрый день! Большой опыт разработки устройств на микроконтроллерах. Могу сделать.
-
368 18 0 1 Good day .
The task is simple, ready to help. Write in the post or telegram reviakinea.
Добрый день.
Задача простая, готов помочь. Пишите в личку или в телеграм reviakinea.
-
241 5 0 Good day ! There is a lot of work with AVR and ATTiny. The duration of execution is from 1 to 3 days.
Добрый день! Есть опты работы с AVR и ATTiny. Срок выполнения - от 1 до 3 дней.
-
При такой схеме включения, совсем необязательно определять нажатие кнопки с помощью АЦП, на входе будет напряжение 4.55В, что вполне себе уровень логической единицы. Т.е. бессмысленная операция.
-
А что АЦП измеряет? И зачем выделять порт постоянно включенному светодиоду?
-
Согласен, но на этой цепи разные значения от 3 до 5 вольт. Надо только один сигнал.
-
от 3 до 5В это тоже вполне лог. единица. Зачем АЦП?
-
Current freelance projects in the category Embedded systems and microcontrollers
CRM with separate Prom functionality - HabberHello. There is a need for the following "crm". For example - I have 10 sites on prom.ua It is necessary that all orders from these sites are transferred to Hubber. I see it like this: all orders from 10+ sites are loaded into 1 crm - then transferred to Hubber via api.… Embedded systems and microcontrollers, Data parsing ∙ 3 proposals |
IOT Device
204 USD
It is necessary to develop a device that will collect sensor data every minute and write it to an SD card. Every 10 minutes, it will connect to WIFI and send the data via HTTP POST to the url [to be provided later] in JSON format with a specific token in the header. Upon… Embedded systems and microcontrollers, Web programming ∙ 2 proposals |
Programmer Arduino, LGT8F328p
306 USD
A reader of Mifare cards is needed LGT8F328p+rc522+ display Reading full dump, uid and all sectors. Display information on the screen, and via UART in the terminal. Library attached. Embedded systems and microcontrollers |
View the microcontroller menu.Good day ! We are looking for a programming designer for a re-design interface controller of the packaging trailer (packing device for products). You need to replace the old menu column with the new one that the designer will develop. Up to 15 screens with different buttons I… Embedded systems and microcontrollers |
Development of broadband antennasDevelopment of broadband antennas Develop, manufacture an experimental sample, and measure the parameters of a broadband antenna in the range up to 500MHz (there are tasks for other ranges as well) Both compact antenna options and those more suitable for radiation up to 10W are… Embedded systems and microcontrollers |