Drawing in the compass.
3 USDСделать чертеж а1 по пдфу, прикрепленному к проекту.
Applications 1
-
1 day3 USD
409 20 0 1 day3 USDReady to Cooperate
Готов сотрудничать
-
1 day3 USD
381 13 0 1 day3 USDIf relevant, call me.
There will be clarificing questions.
Если актуально - обращайтесь.
Будут уточняющие вопросы.
-
1 day3 USD
362 12 0 1 day3 USDI do it quality and quickly!
Сделаю качественно и быстро!
-
1 day3 USD
1156 147 9 3 1 day3 USDI do it quickly, quality.
Go to turn.
Examples of work on qwerity.jimdo.com/gallery in the "Technical Documentation" section and in the profile.
Сделаю быстро, качественно.
Обращайтесь.
Примеры работ на qwerity.jimdo.com/галерея в разделе "Техническая документация"и в профиле.
-
Winning proposal1 day3 USD
738 36 0 Winning proposal1 day3 USDI will perform quality. Do you need two lists? When do I need a job?
Выполню качественно. Нужны два листа? На когда нужна работа?
-
1 day3 USD
854 27 0 1 day3 USDHi, Cyril
I’m ready to complete the project, I’m going to start now.
Здравствуйте, Кирилл
Готов выполнить проект, приступлю сейчас.
Current freelance projects in the category Drawings and diagrams
Final plugDevelop a metal end cap with a diameter of 320 mm. The design includes hinge, mechanical fasteners, and tension locks with a hook elesa-ganter. Drawings and diagrams, Designing ∙ 2 proposals |
Project of a one-story house 165 sq
50 USD
Need to create a Project of a single-story private house - 2D, 3D. Area 165 sq.m (length 16.5m, width 10m). Room dimensions are also specified (1 sq = 0.5m). Attached is my plan, which needs to be more precisely refined according to all drafting rules. Roof with a 1m overhang… Designing, Drawings and diagrams ∙ 9 proposals |
Waveguide 2.45GHz with L swivel hingeIt is necessary to design and calculate a rectangular waveguide with a rotating hinge, design all nodes. Input 6kW magnetron. Output spiral antenna. Dimensions - waveguide cross-section, required length, magnetron and antenna parameters, etc. will be provided upon request. As a… Engineering, Drawings and diagrams |
Drawings of power line supportsI will buy drawings of the KMD section for the following types of power line supports: PB110-8; U110-2; U110-2+5; U110-2P+5; US110-6; U110-2+9; P110-6V; PS110-6V; PS110-6V+4. Drawings are needed for the direct production of the specified supports. Downloaded from the internet,… Drawings and diagrams ∙ 1 proposal |
Calculate the cross-sections of SIPA cables across the territoryI will provide a diagram with distances and estimated loads, you need to calculate the sections of the SIP. There will be three sections, approximately 600 meters each, 2 pieces, and one 300. Engineering, Drawings and diagrams ∙ 2 proposals |