Switch to English?
Yes
Переключитись на українську?
Так
Переключиться на русскую?
Да
Przełączyć się na polską?
Tak
Post your project for free and start getting offers from freelance performers within minutes after posting!

Create a 3D model of the layer for subsequent graving

Translated10 USD

Applications 2

App view is available only registered users.

Client's feedback on cooperation with V'yacheslav Kurovsky

Quality
Professionalism
Price
Availability
Terms

I am satisfied with the work of Vicheslav. I took my wishes in the course of the project. informed about the execution. He went on additional difficulties that were not discussed in advance. The cost of the work, I think, has even been low. It was a pleasure to cooperate! thank you.

Freelancer's feedback on cooperation with Leonid Shevtsov

Payment
Task formulation
Requirements
Availability

The project was not as simple as when familiarizing with TZ. This is not the customer’s fault.
I was hoping for the possibilities. Trying different options to perform the assigned task and discussing with the customer all the nuances was proposed its option. And everything succeeded. Leonid is always in contact. Ready to work with him further.
I recommend it!!The !

  1. 6889
     104  0

    1 day25 USD

    Hello to
    I do it quality and quickly.
    Let us discuss the details and the price of the project.
    Здравствуйте
    Сделаю , качественно , быстро.
    Пишите обсудим детали и цену проекта.

  2. 347  
    1 day10 USD

    Good day !
    I can execute your order in SolidWorks (source + stl file, if necessary and other formats).
    If you are interested, I would like to discuss more in detail everything in personal messages.
    I will be happy to cooperate.
    Good day !
    Добрый день!
    Могу выполнить Ваш заказ в SolidWorks (исходник + stl-файл, при необходимости и другие форматы).
    Если интересует, хотелось бы более подробно обговорить всё в личных сообщениях.
    Буду рад сотрудничать.
    Хорошего дня!

  3. 61  
    1 day5 USD

    Hello to you. I can do it in a few hours and quality. The price will be discussed at LS. Write to [email protected]
    Здравствуйте. Могу выполнить за пару часов и качественно. Цену обсудим на ЛС. Пишите [email protected]

  4. 381    13  0
    2 days31 USD

    I can make the model and drawing again, but I need a font in *.ttf format.
    The radius of 0.1 on some ribs may not be achieved if the width of the border is less than 0.2 mm.
    Модель и чертеж могу сделать заново, но нужен шрифт в формате *.ttf.
    Радиус 0,1 на некоторых ребрах может не получиться если ширина грани будет меньше 0,2 мм.

  5. 1162    23  0
    1 day13 USD

    Good day ! I have experience in 3D modeling, design and documentation for metal structures and mechanisms. When working on the project I like to talk to the customer so that I have a clear understanding of the needs and vision of the project. I always follow the lines and quality when implementing the project.

    I work in such programs:
    The Inventor
    The Solidworks
    The Fusion 360
    by AutoCAD
    The Compas 3D

    I have experience in implementing such projects.
    I will be pleased with the possibilities of cooperation.

    Examples of my work:
    HTTPS://gallery.autodesk.com/users/7QYLNRRH6U3P
    Google Drive

    With respect, Oleg!
    • • • • • •
    CV: Google Drive
    Email: [email protected]
    Posts by: @ThePanchenko
    Skype: https://join.skype.com/invite/FDFW0l1sxtFU
    Viber & WhatsApp: +380977726032
    Добрый день! Имею опыт в 3D моделирование, проектировании и оформления документации для металлических конструкций и механизмов. При работе над проектом мне нравится говорить с клиентом, чтобы у меня было четкое понимание потребностей и видения проекта. Всегда соблюдаю строки и качество при выполнении проекта.

    Работаю в таких программах:
    - Inventor
    - SolidWorks
    - Fusion 360
    - AutoCad
    - KOMPAS-3D

    Имею опыт исполнения подобных проектов.
    Буду рад возможности сотрудничества.

    Пример моих работ:
    https://gallery.autodesk.com/users/7QYLNRRH6U3P
    Google Drive

    С уважением, Олег!
    --------------------------------
    CV: Google Drive
    Email: [email protected]
    Telegram: @ThePanchenko
    Skype: https://join.skype.com/invite/FDFW0l1sxtFU
    Viber & WhatsApp: +380977726032

  6. 591    17  1   1
    1 day25 USD

    Hello to Leonid.

    I work at the Inventor.

    Ready to implement your project.

    Examples of works:
    - Google Drive

    Go to turn.
    Category: Drinkerdp

    with respect,
    by Sergey.
    Здравствуйте Леонид.

    Работаю в Inventor.

    Готов выполнить Ваш проект.

    Примеры работ:
    - Google Drive

    Обращайтесь.
    СКАЙП: drinkerdp

    С уважением,
    Сергей.

  7. 2340    69  4   1
    Winning proposal1 day10 USD

    Leonid, hello to you!
    Ready to implement the project.
    I have been a designer engineer for more than 18 years.
    He did similar things in various CAD programs.
    Get ready to play a little until the result that will fit you.
    Reference to some of my work
    Google Drive
    https://www.facebook.com/Piligrim.KVS.3Dmod/
    On the output you will get the STL file and the source.
    Леонид, здравствуйте!
    Готов выполнить проект.
    Работаю инженером-конструктором более 18 лет.
    Делал подобные вещи в различных CAD программах.
    Готов немного поиграться до результата который Вас устроит.
    Ссылка на некоторые мои работы
    Google Drive
    https://www.facebook.com/Piligrim.KVS.3Dmod/
    На выходе получите файл СТЛ и исходник

  8. 566    6  0
    3 days25 USD

    The compass model refers to any other model, and an empty file is opened.
    Fix the original model.
    Please contact us to discuss details.
    The contacts:
    e-mail: [email protected]
    Tagged: playback
    Posts Tagged: https://t.me/xugack
    vk: vk.com\xugack
    Examples of works:
    Group of VK: https://vk.com/3dengineering
    3D modeling http://xugack.blogspot.com/p/3d-3d.html
    Reversing of http://xugack.blogspot.com/p/blog-page_20.html
    Transparency calculations http://xugack.blogspot.com/p/blog-page_25.html
    Gas/hydrodynamic and heat calculations http://xugack.blogspot.com/p/blog-page_4.html
    Charts http://xugack.blogspot.com/p/blog-page_6.html
    Модель компаса ссылается на еще какую то модель, и открывается пустой файл .
    Прикрепите исходную модель
    Обращайтесь, обсудим детали
    Контакты:
    e-mail: [email protected]
    skype: xugack
    Telegram: https://t.me/xugack
    vk: vk.com\xugack
    Примеры работ:
    Группа ВК: https://vk.com/3dengineering
    3D моделирование http://xugack.blogspot.com/p/3d-3d.html
    Реверсинжиниринг http://xugack.blogspot.com/p/blog-page_20.html
    Прочностные расчеты http://xugack.blogspot.com/p/blog-page_25.html
    Газо/гидродинамические и тепловые расчеты http://xugack.blogspot.com/p/blog-page_4.html
    Чертежи http://xugack.blogspot.com/p/blog-page_6.html

  9. 1 bid hidden
  • Profile deleted
    17 September 2019, 21:03 |

    Насколько тонким делать?

  • Leonid Shevtsov
    17 September 2019, 22:48 |

    https://yadi.sk/i/1b9mhSvfIVf7JA -текст клейма по ссылке

    Высота шрифта 3мм

    Радиус скругления вершины 0,1-0,2мм

    https://yadi.sk/d/MyXqFWAmUKnpUw

  • V'yacheslav Kurovsky
    17 September 2019, 21:50 |

    Леонид, модель Компас ссылается на деталь с которой собственно и был сделан оттиск и соответственно (как уже писали) модель пустая. Необходим и второй файл Компас, ну и как вариант сам шрифт или название шрифта.

  • Leonid Shevtsov
    17 September 2019, 22:52 |

    Высота шрифта 3мм

    Радиус скругления вершины 0,1-0,2мм

    https://yadi.sk/d/MyXqFWAmUKnpUw

    Шрифт записанный в документе по этой ссылке у меня не получилось сделать с уклонами и скруглением. А какой шрифт подойдёт я не знаю. Нужно чтобы было похоже на имеющийся.

  • V'yacheslav Kurovsky
    17 September 2019, 22:56 |

    Леонид, готов поиграться ))) но только как исполнитель...

  • V'yacheslav Kurovsky
    17 September 2019, 22:40 |

    О, это уже другое дело )))

  • Leonid Shevtsov
    17 September 2019, 22:53 |

    Только нужно в зеркальном отражении, соответственно.

  • V'yacheslav Kurovsky
    17 September 2019, 22:54 |

    )) понятно

  • V'yacheslav Kurovsky
    17 September 2019, 23:02 |

    Леонид, высота оттиска - как указано на чертеже - 0,6мм? так?

  • Sergey Yakovenko
    17 September 2019, 23:43 |

    С таким углом модель сделать невозможно, обычная математика: высота профиля буквы - 0,6 мм, уклон 30 градусов добавляет порядка 0,35 мм, а это между буквами должно быть больше 0,7 мм. Судя с чертежа расстояние между буквами вряд ли можно увеличить из-за диаметра 20 мм. Кроме этого есть критичные поверхности у букв "r" где уклон сделать тоже невозможно.

  • Sergey Yakovenko
    18 September 2019, 0:24 |

    а  "гравировку" такого шрифта с такими параметрами выполнить тоже невозможно, так как у основания тоже должно быть скругление... Кто докажет обратное? 🙂

  • Sergey Yakovenko
    18 September 2019, 1:12 |

    но модель можно попробовать сделать...

  • Sergey Yakovenko
    18 September 2019, 9:30 |

    попробовал-поигрался 🙂 угол на выделенных поверхностях 20 градусов, остальные 25, ширина профиля некоторых элементов букв близка к 0,2 мм, так что скругление R0.1 может получиться но не факт.image

  • Sergey Yakovenko
    18 September 2019, 11:13 |

    короче... некоторые элементы букв (контур) нужно прорисовывать вручную для возможности установки уклона 25 градусов и радиуса 0,1 мм.

    Кроме этого, непонятно: в модели шрифт расположен на вогнутой поверхности, а на чертеже - ровной.

    Если проект актуальный - обращайтесь!

Current freelance projects in the category 3D modeling and visualization

I am looking for a designer to develop a template for cardboard boxes.

25 USD

I am looking for a designer who can develop a proper layout for three boxes for me. The main task is to make it possible to reduce the size of the box in length or width. I would be grateful for your help and suggestions.

Engineering3D modeling and visualization ∙ 1 proposal

Need consultation from VRay specialist

For one urgent project, VRay needs to be used. I have always worked in Corona. I need consultation on setting optimal parameters for my scene as well as answers to several questions that have arisen during work. It is preferable to have a call.

3D modeling and visualization ∙ 1 proposal

Creating a mockup image for an online store product card

22 USD

Hello! It is necessary to create a mockup of a product card for an online store. I am providing examples below. The name needs to be changed to HHCPO instead of HHC-P.

Vector graphics3D modeling and visualization ∙ 13 proposals

Interior design for a cafe

255 USD

Looking for an interior designer for a cafe. Approximate area of the premises is 42m Requirements for the designer - he must be located in Lviv, so that it is possible to discuss all the nuances on the spot.

3D modeling and visualizationInterior design ∙ 7 proposals

3D visualization of a pendant

It is necessary to create a 3D visualization of a car canopy against the background of a private house (background of your choice). This visualization will be used for placement on the website. Three variants of canopies are needed (freestanding with a semi-circular cover,…

3D modeling and visualization3D modeling ∙ 24 proposals

Client
Leonid Shevtsov
Ukraine Ukraine  1  0
Project published
4 years ago
200 views